商用無料の写真検索さん
           


northwestschoolofwoodenboatbuilding

タグをコピペすると、ブログなどにカンタン貼り付けできます。

各画像のライセンスに従って利用してください。被写体の肖像権、商標・意匠登録等にご注意ください。

詳しくはクリエイティブ・コモンズ・ライセンスの利用についてをご覧ください。

fighting current up Bull Passage, crossing tacks with RED URCHIN (Adrian recorded this track of their 17" Pathfinder)
fighting current up Bull Passage, crossing tacks with RED URCHIN (Adrian recorded this track of their 17" Pathfinder)
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

IMG_1708
IMG_1708
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

primer behind combings area, before installing
primer behind combings area, before installing
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


now the holes are in, we can cut out the partner blocks
now the holes are in, we can cut out the partner blocks
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

fingers crossed, this might work
fingers crossed, this might work
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

clamping up rudder to glass it
clamping up rudder to glass it
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


glassing centreboard
glassing centreboard
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

John Welsford
John Welsford
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

looking back to shore
looking back to shore
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Eric sands that mast! and sands, and sands,
Eric sands that mast! and sands, and sands,
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Mitch
Mitch
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cabin sides glued in
cabin sides glued in
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Barracuda, the Mower Dory that beat us all!
Barracuda, the Mower Dory that beat us all!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

glassing centreboard
glassing centreboard
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

IMG_2078
IMG_2078
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


glassing centreboard
glassing centreboard
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

canin top on!
canin top on!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cabin side cleats all in, ready to glue in the sides
cabin side cleats all in, ready to glue in the sides
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


cut hole in transom for tiller
cut hole in transom for tiller
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

trim and round over cabin top sides
trim and round over cabin top sides
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

preparing to drill pilot hole at 2.5 degrees
preparing to drill pilot hole at 2.5 degrees
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Manson's Landing, Cortes
Manson's Landing, Cortes
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Chris sanding hatch lids
Chris sanding hatch lids
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

laid fillets around sole perimeter
laid fillets around sole perimeter
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


shaping boom, next to mast
shaping boom, next to mast
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

shaping laminated boom, tapered at each end
shaping laminated boom, tapered at each end
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

canin top on!
canin top on!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


test fitting mast partners
test fitting mast partners
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cabin top and side doublers glued in
cabin top and side doublers glued in
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

plotting the eight-side edges, using a 7-10-7 ratio
plotting the eight-side edges, using a 7-10-7 ratio
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


rudder head glue-up
rudder head glue-up
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cutting the aft side of mast box, for ramp modification
cutting the aft side of mast box, for ramp modification
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

plug in base of mast
plug in base of mast
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


dry fitting cabin sides
dry fitting cabin sides
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

seat-tops glued in!
seat-tops glued in!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cut hole in transom for tiller
cut hole in transom for tiller
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


aft side of mast box, cut out for ramp modification
aft side of mast box, cut out for ramp modification
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cabin top glue-up
cabin top glue-up
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

fine-tuning the mast partners
fine-tuning the mast partners
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Fred and Eric working on the mast
Fred and Eric working on the mast
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

epoxy coating underside of hatch lids
epoxy coating underside of hatch lids
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

canin top on!
canin top on!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


M8256971
M8256971
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

canin top on!
canin top on!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

test fitting mast partners
test fitting mast partners
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


IMG_0113
IMG_0113
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Derek's Liberty 53, up the creek!
Derek's Liberty 53, up the creek!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

M8256996
M8256996
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


cabin sides prep, cut out limber holes in forward ends
cabin sides prep, cut out limber holes in forward ends
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

fitting backing plates for deadlights
fitting backing plates for deadlights
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

transom doubler spread with thickened epoxy ("glue")
transom doubler spread with thickened epoxy ("glue")
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


the mast-box ramp parts are glassed before cutting out
the mast-box ramp parts are glassed before cutting out
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

M8256983
M8256983
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

M8246934
M8246934
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Fred sanding deadlight backing plates
Fred sanding deadlight backing plates
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

test fitting mast partners
test fitting mast partners
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

using a temporary filler block to hold the ramp parts in position during glue-up
using a temporary filler block to hold the ramp parts in position during glue-up
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Eric
Eric
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

M8267004
M8267004
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

yard tapered, ready to go to round
yard tapered, ready to go to round
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1



2,221件~2,280件 (全 2,300件)

(C)名入れギフト.com