商用無料の写真検索さん
           


porttownsendwa

タグをコピペすると、ブログなどにカンタン貼り付けできます。

各画像のライセンスに従って利用してください。被写体の肖像権、商標・意匠登録等にご注意ください。

詳しくはクリエイティブ・コモンズ・ライセンスの利用についてをご覧ください。

laminated blanks
laminated blanks
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

ack! I've sprung a leak!
ack! I've sprung a leak!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Look at that pretty little boat go!
Look at that pretty little boat go!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


rubber tubing will lay in this groove in the hatch combing
rubber tubing will lay in this groove in the hatch combing
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

epoxy-coating spars
epoxy-coating spars
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

a bit of weave showing through, I wonder if it needs another coat of resin before the I put the cloth on?
a bit of weave showing through, I wonder if it needs another coat of resin before the I put the cloth on?
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


stern, transom cap detail
stern, transom cap detail
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cabin sides prep, cut out limber holes in forward ends
cabin sides prep, cut out limber holes in forward ends
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8166262
P8166262
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


masking gunwale, bow detail
masking gunwale, bow detail
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

mark for punching holes for stitching
mark for punching holes for stitching
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

white on white
white on white
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


hot-coat spars with 2nd coat of epoxy, boom detail, forward end showing tack and reefing hardware mounts
hot-coat spars with 2nd coat of epoxy, boom detail, forward end showing tack and reefing hardware mounts
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

first coat of epoxy on decks and combings
first coat of epoxy on decks and combings
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

John Welsford outlines the desired attributes of a small cruising dinghy
John Welsford outlines the desired attributes of a small cruising dinghy
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


cut to fit the circumference, and chamfer the insides of the top and bottom edges
cut to fit the circumference, and chamfer the insides of the top and bottom edges
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

What a day for an inaugural cruise!
What a day for an inaugural cruise!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Keith sets sail, and Zephyr accelerates away
Keith sets sail, and Zephyr accelerates away
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Skol floats for the first time
Skol floats for the first time
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

light winds did not deter the fun
light winds did not deter the fun
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

soaked the leather in water for about 40 minutes, and started stitching with a doubled length of waxed linen "thread"
soaked the leather in water for about 40 minutes, and started stitching with a doubled length of waxed linen "thread"
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


needs more paint
needs more paint
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Scamp Camp #4 commences
Scamp Camp #4 commences
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Terry's "Skol" hits the water...
Terry's "Skol" hits the water...
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


sanding, while the snow flies
sanding, while the snow flies
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

2nd coat on: damned dust is a problem, no matter what I do!
2nd coat on: damned dust is a problem, no matter what I do!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

centreboard uphaul gear
centreboard uphaul gear
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


filled holes with epoxy resin, using tape to level and reduce sanding
filled holes with epoxy resin, using tape to level and reduce sanding
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Chris has a good time keeping the boys on track
Chris has a good time keeping the boys on track
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

filled holes with epoxy
filled holes with epoxy
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


Zephyr #162, charging along, strutting her stuff
Zephyr #162, charging along, strutting her stuff
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

laminated tiller blank ready for final shaping
laminated tiller blank ready for final shaping
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

one happy builder!! Congrats, Keith, on a job well done!!
one happy builder!! Congrats, Keith, on a job well done!!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


and we're away!
and we're away!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Keith steps the mast, and rigs the halyard
Keith steps the mast, and rigs the halyard
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

top of mast, rounded
top of mast, rounded
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


passing the flask
passing the flask
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

starboard side of pin in centreboard case
starboard side of pin in centreboard case
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Keith follows in Zephyr, with Derek and Lacy aboard
Keith follows in Zephyr, with Derek and Lacy aboard
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


ready for primer! (cockpit, looking aft)
ready for primer! (cockpit, looking aft)
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

Howard and Derek both stand on gunwale to try to capsize Scamp
Howard and Derek both stand on gunwale to try to capsize Scamp
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

plotting the eight-side edges, using a 7-10-7 ratio
plotting the eight-side edges, using a 7-10-7 ratio
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


hand tools rule!
hand tools rule!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

underside of hatch combings...
underside of hatch combings...
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

filled small divots and discrepancies with glazing compond for final fairing… and then sanded some more!
filled small divots and discrepancies with glazing compond for final fairing… and then sanded some more!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


decks and cabin sanded: details, details
decks and cabin sanded: details, details
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

many Scamp parts await!
many Scamp parts await!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

surprisingly stable with four aboard...
surprisingly stable with four aboard...
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


I get to take the helm, too!
I get to take the helm, too!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

top of mast, plug glued in
top of mast, plug glued in
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

recessed stainless washers and pan-head screws in the plate that will hold the centreboard pin in place
recessed stainless washers and pan-head screws in the plate that will hold the centreboard pin in place
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


layout for "glovebox" hatch, stbd side, viewed from forward side of bulkhead
layout for "glovebox" hatch, stbd side, viewed from forward side of bulkhead
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

first primer coat (on inside of boat) complete
first primer coat (on inside of boat) complete
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

epic times!
epic times!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


another wonderful morning
another wonderful morning
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8166300
P8166300
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

a radius-cutter on the lathe takes the ends down to a perfect bull-nose
a radius-cutter on the lathe takes the ends down to a perfect bull-nose
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


drilled oversized holes in bottom of skegs for mounting UHMW runners
drilled oversized holes in bottom of skegs for mounting UHMW runners
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

The setting: Cates Park launch ramp, North Vancouver, BC
The setting: Cates Park launch ramp, North Vancouver, BC
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

finger-jointed scarfs in planks, garboard plank has glass cloth and two coats of epoxy, with fillet on garboard to 2nd plank seam
finger-jointed scarfs in planks, garboard plank has glass cloth and two coats of epoxy, with fillet on garboard to 2nd plank seam
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1



61件~120件 (全 1,362件)

(C)名入れギフト.com