商用無料の写真検索さん
           


porttownsendwa

タグをコピペすると、ブログなどにカンタン貼り付けできます。

各画像のライセンスに従って利用してください。被写体の肖像権、商標・意匠登録等にご注意ください。

詳しくはクリエイティブ・コモンズ・ライセンスの利用についてをご覧ください。

all combings dry-fit and screwed in place
all combings dry-fit and screwed in place
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

glassing the bottom
glassing the bottom
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8166345
P8166345
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


IMG_0755
IMG_0755
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P6220788
P6220788
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

cabin-top cleats have a nice little bend to them
cabin-top cleats have a nice little bend to them
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


P8066106
P8066106
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

dry-fitting oarlock blocks
dry-fitting oarlock blocks
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

mast step drain hole
mast step drain hole
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


positioning hatch combings with screws through small spacer blocks
positioning hatch combings with screws through small spacer blocks
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

sanded and shaped the epoxy plug fair
sanded and shaped the epoxy plug fair
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

hatches arrived!
hatches arrived!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


some fancy joinery is required, for all these weird angles
some fancy joinery is required, for all these weird angles
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

sanding primer
sanding primer
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

rowing shell gets final coat of varnish
rowing shell gets final coat of varnish
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


dry fitting bow eye
dry fitting bow eye
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

glue-up of cabin-top hardware backing plates
glue-up of cabin-top hardware backing plates
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

oarlock blocks, final layout scribed on blocks
oarlock blocks, final layout scribed on blocks
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


clean up to final shape with rasp, bulkhead 6 starboard
clean up to final shape with rasp, bulkhead 6 starboard
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

transom-cap doubler glued in
transom-cap doubler glued in
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P6290839
P6290839
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


P8166223
P8166223
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

combing fillets
combing fillets
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

hatch-lid tethers
hatch-lid tethers
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


P8066109
P8066109
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

glue-up of cabin-top hardware backing plates
glue-up of cabin-top hardware backing plates
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

port midships
port midships
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


cutting out backing plates
cutting out backing plates
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

glue areas roughed up
glue areas roughed up
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8166344
P8166344
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


glue-up of cabin-top hardware backing plates
glue-up of cabin-top hardware backing plates
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

hatch doubler fitting
hatch doubler fitting
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

it looks smaller with the sole in!
it looks smaller with the sole in!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


all glued in
all glued in
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

forward transom cleats
forward transom cleats
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8116219
P8116219
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


P8076124
P8076124
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

all the pieces, rounded and ready for glue-up
all the pieces, rounded and ready for glue-up
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

aft hatches cut out
aft hatches cut out
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


P8066112
P8066112
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

mix-station
mix-station
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

IMG_0868
IMG_0868
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


IMG_0800
IMG_0800
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

IMG_0787
IMG_0787
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8071309
P8071309
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


glue-up of cabin-top hardware backing plates
glue-up of cabin-top hardware backing plates
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

forward hatch locations
forward hatch locations
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8076125
P8076125
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


P8076119
P8076119
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8066108
P8066108
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

port "glovebox hatch" backing plate glued in
port "glovebox hatch" backing plate glued in
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


sole in place to confirm fit
sole in place to confirm fit
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

P8106173
P8106173
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

IMG_0793
IMG_0793
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


combing rail, aft end, before shaping
combing rail, aft end, before shaping
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

now, about that access hatch...
now, about that access hatch...
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

IMG_0992
IMG_0992
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1


P8106178
P8106178
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

nice hatch kits!
nice hatch kits!
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1

I cut the combing down a lot, to fit it as close as possible to the centreboard trunk
I cut the combing down a lot, to fit it as close as possible to the centreboard trunk
by Dale Simonson

クリエイティブ・コモンズ 表示-継承 2.1



721件~780件 (全 1,360件)

(C)名入れギフト.com