The setup (front view) : 無料・フリー素材/写真
The setup (front view) / post-apocalyptic research institute
| ライセンス | クリエイティブ・コモンズ 表示-継承 2.1 |
|---|---|
| 説明 | This is a binary clock that was built into a 3d-printed case created in Minecraft. It shows the current time in a binary coded decimal format. The model was exported with the free tool Mineways and printed on a Zprinter 650 3d-printer, with a block size of 125mm^3 (so every block has an edge length of 5mm). After printing, LEDs were glued into the case after filing the openings a bit wider. Then, the LEDs were soldered to form a 4x4 LED matrix, and the matrix was connected to an Arduino board. A technical description of the setup as well as downloads of the model and the code can be found here: postapocalypticresearchinstitute.wordpress.com/2012/07/18... |
| 撮影日 | 2012-10-01 14:06:58 |
| 撮影者 | post-apocalyptic research institute |
| タグ | |
| 撮影地 |