top of 1" measurement pvc. : 無料・フリー素材/写真
top of 1" measurement pvc. / Jeremy_
| ライセンス | クリエイティブ・コモンズ 表示-継承 2.1 |
|---|---|
| 説明 | two wires out the top are to the etape resistor. lower wire is just holding the pipe in the right place, discouraging it from moving out away from the tub. The bulkhead fitting is mounted on the lower part of the outer tub wall, which is slanted inward by a few degrees, the pipe tries to follow that slant. The plastic tub is pliable enough that we can persuade the pipe to go closer to vertical. That little plastic nub where maybe a tube would be on another model (?) is doing a good job to help the pipe stay in the right place. |
| 撮影日 | 2011-03-02 23:56:00 |
| 撮影者 | Jeremy_ |
| 撮影地 | |
| カメラ | Canon EOS DIGITAL REBEL XT , Canon |
| 露出 | 0.017 sec (1/60) |
| 開放F値 | f/3.5 |
| 焦点距離 | 22 mm |